Cannabis Rosin Press – Top Home and Commercial Rosin Presses (In-Depth Buying Guide)
If you’re in the market for a cannabis rosin press, this video will show you the best home and commercial rosin presses in the market today. Perhaps you’ve read …
Oh wow, I couldn't take even 20 seconds of that monotone zombie narrator.
If you think that's affordable you're insane lol
Why don’t you put prices with the rig
Terrible guide no price is given
Why does this list sound like it was compiled and presented by someone who hasn't pressed Rosin a single got dang time in their lives??
I have the Rosinbomb press. Not the Rocket but the M-50. Not pleased with it at all. Will be getting a different press. DO NOT WASTE YOUR MONEY. The plates heat only in the very center. It rises on a single post so even with the form pressed bags the press is still wonky. Poorly done Rosinbomb. Back to the drawing board. $1600.00 – over $3000.00. Not worth $100.
Nugmasher is the best!!!!!
How about pricing?
Why is everything repeated ? I mean we can jump back an hear again if necessary. Stop that mate.
Sasquash is limited warranty! Says it right on their website!
Check out Instagram for the Flux Rosin Press it’s what they advertise and well worth the price tag.
Got a NugSmasher OG 12 Ton last month.Look at it every night before bed and say ya I fucking own that
Who are these jack offs that named a press after an uphill off-road car race?? Pikes peak?!?!?!? Wtf
Pure BS..This video shows the presses with the biggest advertising budget. (Home use). Dulytek and even Dabpress are cheaper and just as good..As far as the Rosinbomb goes..it sux compared to a lesser priced Dulytek electric DW6000! (same type of press – but 3-ton and nicer PID)
Good video; but the whole, “easily-with ease” wording is redundant.
Tri-minator. Here the whole time I thought trim-inator. Boy do I feel stupid
$230. Dulytek DM800. I love it and use it near daily.
OMG. That voice. It sounds like he thinks I'm 6.
Good video on showing people some options, but I think a shop press and plate set of some kind is best bang for your buck. Here's mine with 3×6 inch plates. Check it out hopefully you like it. If you do sub up and share it. https://m.youtube.com/watch?v=jlloeZUjKj4
ive evolved on to using longer bags, a square make no sense
Best plate size and thickness?
"Bigger Plates" is a slippery slope. The industry standard is becoming a SLENDER, "LONG" plate. The longer the rosin is on the plate, the more terps are aggressively "evaporated" or burned off of the rosin you've just pressed, and the actual material you are pressing is where the heat vector begins. So the more slender the plate, the quicker the rosin drips off, and most importantly, the less distance the rosin in the MIDDLE of the material you are pressing has to travel, to then drip off the plate. The more material you have in a more perfect square, the longer distance the rosin must travel over the heat to drip off.
Thumbs down. Seriously what kind of shitty ass review doesn't include prices.
too expensive half price in ebay
Prices for all of these?
Really helpful video. is there a big price difference for using your own elbow grease. Thanks for showing the no frills electric press
All the fucking home presses are half a grand and up like what u think we are bill gates
10 dollar hair straightener, 2 dollars for parchment paper.. dont be encouraging people to make large qts.. rosin sucks after a couple days sitting around.
Not sure where they got their information but the Nug smasher OG can press up to 14 g of Flower. The mini 3.5 g.
There's only one and it's the slug 33… People that is the rosin press that you are looking for.
Good video. Can you list the average yields of each press?
Oh wow, I couldn't take even 20 seconds of that monotone zombie narrator.
If you think that's affordable you're insane lol
Why don’t you put prices with the rig
Terrible guide no price is given
Why does this list sound like it was compiled and presented by someone who hasn't pressed Rosin a single got dang time in their lives??
I have the Rosinbomb press. Not the Rocket but the M-50. Not pleased with it at all. Will be getting a different press. DO NOT WASTE YOUR MONEY. The plates heat only in the very center. It rises on a single post so even with the form pressed bags the press is still wonky. Poorly done Rosinbomb. Back to the drawing board. $1600.00 – over $3000.00. Not worth $100.
Nugmasher is the best!!!!!
How about pricing?
Why is everything repeated ? I mean we can jump back an hear again if necessary. Stop that mate.
Sasquash is limited warranty! Says it right on their website!
on the market or in the market place
"Easily squish 3.5gs with ease" lmao
https://www.amazon.com/Tech-L-Industrial-Hydraulic-Extractor-Movable/dp/B07PS4T7JG/ref=sr_1_2?keywords=tech-l&qid=1557238249&s=gateway&sr=8-2 rosin very good cheap
Check out Instagram for the Flux Rosin Press it’s what they advertise and well worth the price tag.
Got a NugSmasher OG 12 Ton last month.Look at it every night before bed and say ya I fucking own that
Who are these jack offs that named a press after an uphill off-road car race?? Pikes peak?!?!?!? Wtf
Pure BS..This video shows the presses with the biggest advertising budget. (Home use). Dulytek and even Dabpress are cheaper and just as good..As far as the Rosinbomb goes..it sux compared to a lesser priced Dulytek electric DW6000! (same type of press – but 3-ton and nicer PID)
Good video; but the whole, “easily-with ease” wording is redundant.
Nugsmasher XP?
http://www.CannabisQueen.Org
Tri-minator. Here the whole time I thought trim-inator. Boy do I feel stupid
$230. Dulytek DM800. I love it and use it near daily.
OMG. That voice. It sounds like he thinks I'm 6.
Good video on showing people some options, but I think a shop press and plate set of some kind is best bang for your buck. Here's mine with 3×6 inch plates. Check it out hopefully you like it. If you do sub up and share it.
https://m.youtube.com/watch?v=jlloeZUjKj4
ive evolved on to using longer bags, a square make no sense
Best plate size and thickness?
"Bigger Plates" is a slippery slope. The industry standard is becoming a SLENDER, "LONG" plate. The longer the rosin is on the plate, the more terps are aggressively "evaporated" or burned off of the rosin you've just pressed, and the actual material you are pressing is where the heat vector begins. So the more slender the plate, the quicker the rosin drips off, and most importantly, the less distance the rosin in the MIDDLE of the material you are pressing has to travel, to then drip off the plate. The more material you have in a more perfect square, the longer distance the rosin must travel over the heat to drip off.
Thumbs down. Seriously what kind of shitty ass review doesn't include prices.
too expensive half price in ebay
Prices for all of these?
Really helpful video. is there a big price difference for using your own elbow grease. Thanks for showing the no frills electric press
All the fucking home presses are half a grand and up like what u think we are bill gates
10 dollar hair straightener, 2 dollars for parchment paper.. dont be encouraging people to make large qts.. rosin sucks after a couple days sitting around.
Not sure where they got their information but the Nug smasher OG can press up to 14 g of Flower. The mini 3.5 g.
There's only one and it's the slug 33… People that is the rosin press that you are looking for.
Good video. Can you list the average yields of each press?